=head1 LICENSE

Copyright [1999-2015] Wellcome Trust Sanger Institute and the EMBL-European Bioinformatics Institute
Copyright [2016-2023] EMBL-European Bioinformatics Institute

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

     http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

=cut


=head1 CONTACT

  Please email comments or questions to the public Ensembl
  developers list at <http://lists.ensembl.org/mailman/listinfo/dev>.

  Questions may also be sent to the Ensembl help desk at
  <http://www.ensembl.org/Help/Contact>.

=cut

=head1 NAME

Bio::EnsEMBL::DBSQL::AssemblySliceAdaptor - adaptor/factory for MappedSlices
representing alternative assemblies

=head1 SYNOPSIS

  my $slice =
    $slice_adaptor->fetch_by_region( 'chromosome', 14, 900000, 950000 );

  my $msc = Bio::EnsEMBL::MappedSliceContainer->new( -SLICE => $slice );

  my $asa = Bio::EnsEMBL::DBSQL::AssemblySliceAdaptor->new;

  my ($mapped_slice) = @{ $asa->fetch_by_version( $msc, 'NCBIM36' ) };

=head1 DESCRIPTION

NOTE: this code is under development and not fully functional nor tested
yet.  Use only for development.

This adaptor is a factory for creating MappedSlices representing
alternative assemblies and attaching them to a MappedSliceContainer. A
mapper will be created to map between the reference slice and the common
container slice coordinate system.

=head1 METHODS

  new
  fetch_by_version

=head1 REALTED MODULES

  Bio::EnsEMBL::MappedSlice
  Bio::EnsEMBL::MappedSliceContainer
  Bio::EnsEMBL::Compara::AlignSlice
  Bio::EnsEMBL::Compara::AlignSlice::Slice
  Bio::EnsEMBL::Variation::StrainSlice

=cut

package Bio::EnsEMBL::DBSQL::AssemblySliceAdaptor;

use strict;
use warnings;
no warnings 'uninitialized';

use Bio::EnsEMBL::Utils::Argument qw(rearrange);
use Bio::EnsEMBL::Utils::Exception qw(throw warning);
use Bio::EnsEMBL::MappedSlice;
use Bio::EnsEMBL::Mapper;
use Bio::EnsEMBL::DBSQL::BaseAdaptor;

our @ISA = qw(Bio::EnsEMBL::DBSQL::BaseAdaptor);


=head2 new

  Example     : my $assembly_slice_adaptor =
                  Bio::EnsEMBL::DBSQL::AssemblySliceAdaptor->new;
  Description : Constructor.
  Return type : Bio::EnsEMBL::DBSQL::AssemblySliceAdaptor
  Exceptions  : none
  Caller      : general
  Status      : At Risk
              : under development

=cut

sub new {
  my $caller = shift;

  my $class = ref($caller) || $caller;
  my $self = $class->SUPER::new(@_);
  
  return $self;
}


=head2 fetch_by_version

  Arg[1]      : Bio::EnsEMBL::MappedSliceContainer $container - the container
                  to attach MappedSlices to
  Arg[2]      : String $version - the assembly version to fetch
  Example     : my ($mapped_slice) = @{ $msc->fetch_by_version('NCBIM36') };
  Description : Creates a MappedSlice representing an alternative assembly
                version of the container's reference slice.
  Return type : listref of Bio::EnsEMBL::MappedSlice
  Exceptions  : thrown on wrong or missing arguments
  Caller      : general, Bio::EnsEMBL::MappedSliceContainer
  Status      : At Risk
              : under development

=cut

sub fetch_by_version {
  my $self = shift;
  my $container = shift;
  my $version = shift;

  # arguement check
  unless ($container and ref($container) and
          $container->isa('Bio::EnsEMBL::MappedSliceContainer')) {
    throw("Need a MappedSliceContainer.");
  }

  unless ($version) {
    throw("Need an assembly version.");
  }

  my $slice = $container->ref_slice;

  # project slice onto other assembly and construct MappedSlice for result
  my $mapped_slice = Bio::EnsEMBL::MappedSlice->new(
      -ADAPTOR   => $self,
      -CONTAINER => $container,
      -NAME      => $slice->name."\#mapped_$version",
  );

  my $cs_name = $slice->coord_system_name;

  foreach my $seg (@{ $slice->project($cs_name, $version) }) {
  
    my $proj_slice = $seg->to_Slice;
    
    # create a Mapper to map to/from the mapped_slice artificial coord system
    my $mapper = Bio::EnsEMBL::Mapper->new('mapped_slice', 'native_slice');  
    
    # tell the mapper how to map this segment
    $mapper->add_map_coordinates(
        'mapped_slice',
        $seg->from_start,
        $seg->from_end,
        ($slice->strand * $proj_slice->strand),
        $proj_slice->seq_region_name,
        $proj_slice->start,
        $proj_slice->end
    );
    
    # add the Slice/Mapper pair to the MappedSlice
    $mapped_slice->add_Slice_Mapper_pair($proj_slice, $mapper);
  }

  return [$mapped_slice];
}


=head2 fetch_by_name

  Arg[1]      : Bio::EnsEMBL::MappedSliceContainer $container - the container
                  to attach MappedSlices to
  Arg[2]      : String $name - the assembly name to fetch
  Arg[3]      : (optional) String $version -- the version for the new assembly
  Example     : my ($mapped_slice) = @{ $msc->fetch_by_name('LRG1','1') };
  Description : Creates a MappedSlice representing an alternative assembly
                version of the container's reference slice.
  Return type : listref of Bio::EnsEMBL::MappedSlice
  Exceptions  : thrown on wrong or missing arguments
  Caller      : general, Bio::EnsEMBL::MappedSliceContainer
  Status      : At Risk
              : under development

=cut

sub fetch_by_name {
  my $self = shift;
  my $container = shift;
  my $name = shift;
  my $version = shift; 

  # arguement check
  unless ($container and ref($container) and
          $container->isa('Bio::EnsEMBL::MappedSliceContainer')) {
    throw("Need a MappedSliceContainer.");
  }

  unless ($name) {
    throw("Need an assembly name.");
  }

  $version ||= '';
  my $slice = $container->ref_slice;

  # project slice onto other assembly and construct MappedSlice for result
  my $mapped_slice = Bio::EnsEMBL::MappedSlice->new(
      -ADAPTOR   => $self,
      -CONTAINER => $container,
      -NAME      => $slice->name."\#mapped_$name:$version",
  );


  foreach my $seg (@{ $slice->project($name, $version) }) {
  
    my $proj_slice = $seg->to_Slice;
    
    # create a Mapper to map to/from the mapped_slice artificial coord system
    my $mapper = Bio::EnsEMBL::Mapper->new('mapped_slice', 'native_slice');  
    
    # tell the mapper how to map this segment
    $mapper->add_map_coordinates(
        'mapped_slice',
        $seg->from_start,
        $seg->from_end,
        ($slice->strand * $proj_slice->strand),
        $proj_slice->seq_region_name,
        $proj_slice->start,
        $proj_slice->end
    );
    
    # add the Slice/Mapper pair to the MappedSlice
    $mapped_slice->add_Slice_Mapper_pair($proj_slice, $mapper);
  }

  return [$mapped_slice];
}


1;

